|
Cautions
Thermaltake recommends the following steps to be taken
before using
the
Pacific series radiators and water blocks
- To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
- Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
- It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
- Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.
Thermaltake recommends the following steps to be taken after completing your water loop
setup
- It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
- Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
- DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
- Fill the reservoir to the top as it will prevent air from going into the pump
- If necessary tilt the system slightly from side to side to bleed the air out of the loop.
- Place some paper towels under fittings and joining points to test for leaks.
- Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
- Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
- Coolant might fade over time.
P/N |
CL-W115-CA12BU-A |
---|---|
本体サイズ |
434(L) x 308 (W) x 253 (H) |
重量 | 6.0 kg |
Compatibility |
Intel LGA 2011/1366/1155/1156/1150/775AMD FM2/FM1/AM3+/AM3/AM2+/AM2 |
Components Dimensions |
Pump&Reservoir: 94.1 (L) x 87.4 (W) x 309.7 (H) Radiator : 394(L) x 120 (W) x 39.5 (H) |
Tube Dimensions |
OD : 3/4” ( 19 mm ) : ID : 1/2”( 13 mm ) |
Coolant | Blue |
Kit Contents |
CPU Water Block - Pacific W1 CPU Water Block x1 Pump/Reservoir - Pacific PR22-D5 Pump/Reservoir Combo x1 Radiator - Pacific R360 Radiator x1 (394(L) x 120 (W) x 39.5 (H) Fittings - Pacific 1/2'‘(12.7mm) ID x 3/4'‘(19mm) OD Compression (Chrome) x6 Fan - Riing 12 LED Blue Fan x3 Tube - V-tubler 4T 1/2'‘(12.7mm) ID x 3/4'‘(19mm) OD Transparent Tube x2 Meters Coolant - Coolant 1000 Blue 1000cc x1 Accessory - Intel and AMD Universal Backplated & Mounting Kit - 24pin ATX Bridge Tool x1 - Thermaltake Thermal Grease x1 |
User Manual
- ファイル名
- 概要
- サイズ
- Version
- Release Date