The color of the product may appear different under different lighting.
The color of the product may appear different under different lighting.
This photo is for reference only.
The color of the product may appear different under different lighting.
The color of the product may appear different under different lighting.
The color of the product may appear different under different lighting.

Pacific SF Female to Male 30mm Extender – Silver Black

在庫あり
P/N
CL-W393-CU00SL-A
USD$10.99

インダストリアルスタイル

インダストリアルスタイルの外装に特別に設計されています。このデザインは、美観を向上させるだけでなく、握りやすさのためのより人間工学的な形状も提供します。

組み立てを簡単に

インダストリアルスタイルの外装に特別に設計されています。このデザインは、美観を向上させるだけでなく、握りやすさのためのより人間工学的な形状も提供します。 Pacific SF エクステンダーは、狭いスペースで90度の角度が必要な場合や、チューブの長さを延長したい場合に便利です!

This photo is for reference only.

360度回転可能なノブ

Pacific SFシリーズフィッティングの回転部は360度回転できるように設計されており、液冷システムのインストールをさらに容易にします。この回転デザインには、2つの高品質Oリングが回転部の周りに組み込まれており、液体の漏れを防ぎます。

拡張性が優れた

Pacific SF Extendersは G¼ねじ山数の規格に対応しています。 20mm、30mmの選択が可能で、拡張性が優れた製品となってます。

Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks:

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000, which offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse, and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup:

  • It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000, which offers great performance while preventing corrosion in the entire cooling system (copper, brass, nickel, aluminum, and steel).
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushes the coolant into the loop.
  • DO NOT let the pump run dry. If no liquid is entering the pump, turn off your power immediately.
  • Fill the reservoir to the top to prevent air from entering the pump.
  • If necessary, tilt the system slightly from side to side to bleed the air out of the loop.
  • Place paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
  • Before starting, flush out your system properly to prevent any coolant or unwanted particles from sticking to your tubes, radiators, and other cooling components.
  • Coolant might fade over time.
その他の情報
P/N CL-W393-CU00SL-A
本体サイズ 30mm Extender:∮22 x 35 (H) (mm)
重量 30mm Extender:73 g
素材 Cu
注意事項 Female to Male
Screw Thread G 1/4