透明ウォーターブロックデザイン
Pacific W7 Plusは、12個の高輝度アドレス指定可能なLEDを搭載しており、特別にデザインされた上部カバーにより、透明なウォーターブロックを通して鮮やかなRGBイルミネーションが楽しめます。さらに、Pacific W7 Plusは、TT RGB Plusを使用して照明効果をコントロールできます。



内蔵水温センサー
Pacific W7 Plus CPUウォーターブロックは、冷却液の温度を感知する内蔵温度センサーを搭載しており、その信号をTT RGB Plusに送信します。これにより、現在の温度を監視でき、アドレス指定可能なLEDの色をコントロールしながら制御することができます。

耐腐食銅製ベース
Pacific W7 Plus CPUウォーターブロックの特別に加工された銅製ベースは、防錆ニッケルメッキによって、優れた熱伝導性と耐腐食保護を提供し、過酷な使用条件にも対応します。

最適化された0.15mmフィン構造
Pacific W7 Plus CPUウォーターブロックは、高密度設計を採用しており、最適な隙間と熱放散を実現する0.15mmのチャネルフィン構造を特徴としています。

デジタルライティングコントローラー
コントローラーは、背面にDIPスイッチが搭載されており、簡単に設定されてコントロールできます。1つのライティングコントローラーに最大5台のデバイスを追加でき、ソフトウェアには最大16台のコントローラーを接続できます。
*W7 Plusを他のTT RGB PLUSコントローラーに接続しないでください。

簡単なセットアップ
優れた冷却性能を備えたPacific W7 Plusは、インストールが簡単です。最新のIntel LGA1700およびAMD AM5 CPUに対応しています。
対応リスト:
Intel:LGA 2066/20113/2011/1700/1200/1156/1155/1151/1150
AMD:AM5/AM4/AM3+/AM3/AM2+/AM2/FM2/FM1

TT RGB PLUS Ecosystem
Light up your system with almost limitless possibilities and synchronize your TT RGB PLUS compatible products to create a RGB ecosystem that is truly unique to you.

TT RGB PLUS Software
2.0 - New version of Thermaltake’s TT RGB PLUS patented software, providing more lighting effects and PC monitoring functions.
1.0 - Thermaltake’s patented software to synchronize TT RGB PLUS products with addressable LEDs.
Caution: TT RGB PLUS 2.0 and TT RGB PLUS 1.0 will overwrite one another; users can only install one version of TT RGB PLUS.
2.0 DOWNLOAD NOW
2.0 USER MANUAL
1.0 DOWNLOAD NOW
LEARN MORE

Sync with Razer Chroma Lighting
All Thermaltake TT RGB PLUS products are able to connect into the Razer Chroma ecosystem, Razer Synapse 3. Users can experience synchronized gaming and RGB lighting effects on their TT RGB PLUS liquid cooling system and Razer gaming gear!

Works with Amazon Alexa
All Thermaltake TT RGB PLUS products support Amazon Alexa Voice Service, allowing you to give voice commands to Alexa-enabled devices.

Cautions
Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks:
- To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
- Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
- It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000, which offers great performance while protecting the entire liquid loop from corrosion.
- Before storing your water cooling components, please clean, rinse, and dry. This will ensure a longer lifespan for your components.
Thermaltake recommends the following steps to be taken after completing your water loop setup:
- It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000, which offers great performance while preventing corrosion in the entire cooling system (copper, brass, nickel, aluminum, and steel).
- Fill the reservoir with coolant and cycle the power on and off several times while the pump pushes the coolant into the loop.
- DO NOT let the pump run dry. If no liquid is entering the pump, turn off your power immediately.
- Fill the reservoir to the top to prevent air from entering the pump.
- If necessary, tilt the system slightly from side to side to bleed the air out of the loop.
- Place paper towels under fittings and joining points to test for leaks.
- Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
- Before starting, flush out your system properly to prevent any coolant or unwanted particles from sticking to your tubes, radiators, and other cooling components.
- Coolant might fade over time.