TOUGHFAN 12 White High Static Pressure Radiator Fan (Single Fan Pack)
TOUGHFAN Series White
![](https://thermaltake.azureedge.net/pub/media/wysiwyg/key3/img/TOUGHFAN12White/pic1.jpg)
![](https://thermaltake.azureedge.net/pub/media/wysiwyg/key3/img/TOUGHFAN12White/pic1m.jpg)
Powerful and Noiseless
TOUGHFAN 12 White high static pressure fan can perform at a maximum operating speed of up to 2000 RPM, producing a consistent airflow of 58.35 CFM with 2.41 mm-H2O static pressure, and maintaining a low audio noise level of 22.3 dB-A.
![](https://thermaltake.azureedge.net/pub/media/wysiwyg/key3/img/TOUGHFAN12White/pic11m.jpg)
Exceptional Blade Design
Featuring high tensile strength and low thermal expansion coefficient materials, the fan blade is built with special liquid crystal polymer (LCP), a compound which minimizes vibration when the fan is operating at full speed.
![](https://thermaltake.azureedge.net/pub/media/wysiwyg/key3/img/TOUGHFAN12White/pic15m.jpg)
Metal-Reinforced Motor Hub
The TOUGHFAN’s center is constructed with a full steel motor hub providing enhanced stability and durability.
Full Steel Motor Hub
Second Generation Hydraulic Bearing
![](https://thermaltake.azureedge.net/pub/media/wysiwyg/key3/img/TOUGHFAN12White/pic17.jpg)
![](https://thermaltake.azureedge.net/pub/media/wysiwyg/key3/img/TOUGHFAN12White/pic17a1.png)
The 2nd Generation Hydraulic Bearing
The 2nd generation hydraulic bearing incorporates a new shaft design with inside etches allowing preservation of lubricant on both sides whilst reducing noise during operation. Lowering audible levels and extending lifespan.
Anti-Vibration Mounting System
The in-mold injection anti-vibration rubber pads dampen the vibration of the fan allowing the fan to spin at higher levels without compromising noise levels. The fan is designed with 80% coverage for all corners, maintaining low noise levels when in operation.
![](https://thermaltake.azureedge.net/pub/media/wysiwyg/key3/img/TOUGHFAN12White/pic16m.jpg)
P/N | CL-F117-PL12WT-A |
---|---|
型番 | 120 x 120 x 25 mm |
Started Voltage | 9.0 V |
定格電流 | 0.12 A |
Rated Voltage | 12 V |
入力電源 | 1.44 W |
ファンスピード |
PWM 500~2000 R.P.M With L.N.C PWM 500~1500 R.P.M |
最大風圧 |
2.41 mm-H2O With L.N.C 1.2522 mm-H2O |
最大風量 |
58.35 CFM With L.N.C 45.72 CFM |
ノイズレベル |
22.3 dB-A With L.N.C 19 dB-A |
ベアリングタイプ | Hydraulic Bearing Gen.2 |
製品寿命 | 40,000 hrs,25℃ |
端子 | 4 PIN PWM |
重量 | 212.5 g |