|
Cautions
Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks:
- To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
- Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
- It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000, which offers great performance while protecting the entire liquid loop from corrosion.
- Before storing your water cooling components, please clean, rinse, and dry. This will ensure a longer lifespan for your components.
Thermaltake recommends the following steps to be taken after completing your water loop setup:
- It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000, which offers great performance while preventing corrosion in the entire cooling system (copper, brass, nickel, aluminum, and steel).
- Fill the reservoir with coolant and cycle the power on and off several times while the pump pushes the coolant into the loop.
- DO NOT let the pump run dry. If no liquid is entering the pump, turn off your power immediately.
- Fill the reservoir to the top to prevent air from entering the pump.
- If necessary, tilt the system slightly from side to side to bleed the air out of the loop.
- Place paper towels under fittings and joining points to test for leaks.
- Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
- Before starting, flush out your system properly to prevent any coolant or unwanted particles from sticking to your tubes, radiators, and other cooling components.
- Coolant might fade over time.
P/N | CL-W128-CA12RE-A |
---|---|
重量 | 5.2 |
Compatibility |
Intel LGA 2011/1366/1155/1156/1151/1150/775 AMD FM2/FM1/AM3+/AM3/AM2+/AM2 |
Components Dimensions |
Pump & Reservoir: 289.4 (H) x 84 (W) x 97.5(L) Radiator : 64 (H) x 129 (W) x 282.5 (L) |
Tube Dimensions | OD : 16mm , ID : 12mm , L : 500mm |
Kit Contents |
CPU Water Block - Pacific W1 CPU Water Block x1 Pump/Reservoir - Pacific PR22-D5 Pump/Reservoir Combo x1 Radiator - Pacific RL240 Radiator x1 64 (H) x 129 (W) x 282.5 (L) x1 Fittings - Pacific G1/4 PETG Tube 16mm OD Compression - Chrome x6 Fan - Riing 12 LED Radiator Fan x2 Tube - V-Tubler PETG Tube 16mm(5/8") OD 500mm 4Pack x1 Coolant - C1000 Red Opaque Coolant 1000ml x1 Accessory - Intel and AMD Universal Backplated & Mounting Kit - 24pin ATX Bridge Tool x1 - Thermaltake Thermal Grease x1 |
User Manual
- ファイル名
- 概要
- サイズ
- Version
- Release Date